Filter
Top Products
After Initial Programming
After Initial Programming
When initial programming is completed, notify the System Administrator of the
passwords you have assigned. Then work with the System Administrator to
change the passwords, using the following procedures.
Security Alert:
It is strongly recommended that the System Administrator change the
System Administrator’s mailbox password and the System Administration
Password after initial programming is complete.
Assigning the System Administrator’s Mailbox
Password
The System Administrator should perform the following procedure:
1.
Log in to the System Administrator’s mailbox.
a.
Press [
Intercom
] [
7
] [
7
] [
7
].
b.
Enter the System Administrator’s mailbox number + [ # ].
c.
Enter the System Administrator’s mailbox password + [
# ].
2.
Press [
5
] to change the password.
3.
Enter a new password + [
# ]. For system security, make the password a
difficult-to-guess value.
4.
Re-enter the new password + [
#
].
This new password must be used in the future to log in to the System
Administrator’s mailbox.
Assigning a System Administration Password
The System Administrator should perform the following procedure:
1.
Log in to System Administration.
a.
b.
c.
d.
e.
Press [
Intercom
] [
7
] [
7
] [
7
].
Enter the System Administrator’s mailbox number + [ # ].
Enter the System Administrator’s mailbox password, as assigned in
the procedure above, + [
# ].
Press [
9
] for System Administration.
Enter the System Administration password + [ # ].
3-34
Mail System Initial Programming