Filter
Top Products
Passwords
To protect the mailbox, as soon as its password is initialized, the subscriber should
log in to the mailbox and change the password. Failure to do so leaves the mailbox
unprotected.
When you initialize a password, all other information associated with the mailbox
remains unchanged, including greetings, messages, and so on.
If you forget the System Administrator’s mailbox password or the System
Administration Password, or if the System Administrator’s mailbox needs to be
unlocked, call for support as instructed on the inside front cover of this book. You
should have the following information available:
■
■
■
System Administrator’s mailbox number.
Serial number of the system. (The serial number is located on the right side
panel of the mail system unit. See Figure 2-5 in Chapter 2, “Installation,” for the
location of the serial number label.)
Phone number of the Remote Maintenance Device.
Related Mail System Features
■
■
If a user forgets his or her mailbox password or a mailbox is locked because
of too many unsuccessful Iogin attempts, you can reinitialize the password.
See Mailbox for the initialization procedure.
The System Administrator’s Mailbox is used for all administration of the mail
system.
Programming
Initializing a Mailbox Password
For instructions, see Mailbox in this chapter.
Setting the Minimum Password Length
Action
You Hear...
Step 1 Log in to the mail system as the System
Name, number of new messages and
Administrator.
old messages, Voice Mail Activity
Menu.
Step 2
Press [
9 ] for System Administration.
Prompt to enter the System
Administration Password + [
# ].
Step 3
Enter System Administration
Security message, then System
Password + [
#
].
Administration Menu.
Step 4
Press [
8 ] for System Security.
System Security Menu.
Step 5
Press [
2 ] for Minimum Password
Current Minimum Password Length,
Length.
then prompt to enter the Minimum
Password Length.
Passwords
5-131