Filter
Top Products
Adding a Voice Processing Card
Adding a Voice Processing Card
1.
Set the bank of eight DIP switches (switch S1) and the bank of four DIP
switches (switch S2) on the card being installed as shown in Figure 7-5.
Outside of the United States, some telephone networks provide a tone similar to the U.S. busy tone to
signal that the far-end caller has hung up. In these situations, the third DIP switch on switch S2 on
each PARTNER MAIL card must be set to the "On" position to enable the mail system to detect and
react properly to this signal. This switch should never be set to "On" for systems installed in the U.S.
Figure 7-5. Voice Processing Card DIP Switch Settings
Upgrading the System
7-5