Filter
Top Products
Programming the Mail System
1.
2.
3.
4.
5.
6.
From the System Administration Menu, press [
6 ] for Line Ownership.
Press [
4
] to assign Line Ownership.
Enter a Line No. + [
#
].
Enter the Line Owner’s Extension + [
#
].
Repeat Steps 3 and 4 until finished.
Press [
★
] [
#
] to quit.
Setting System Security Options
Security options include Minimum Password Length and Security Violation
Notification. There are factory settings for both options. Check mail system
Planning Form N to see if you need to change the setting for either option.
■
■
If you do NOT, skip to “After Initial Programming” on page 3-34.
If you do, continue with the procedures in this section. For these
procedures, you select the System Security option from the System
Administration Menu. The System Security Menu plays. Figure 3-10
shows the options available from the System Security Menu.
System
Administration
Menu
9
System
Security
8
Minimum
Password
Length
Security
Violation
Notification
System
Administration
Password
2
3 4
Figure 3-10. System Security Administration
3-32
Mail System Initial Programming