Filter
Top Products
Before You Begin
6.
If additional PARTNER MAIL extensions are specified on Form B1, repeat
Steps 4 and 5 for each one.
7.
Repeat Steps 4 and 5 for each extension that does not have Voice Mail
coverage.
8.
Continue with “Outgoing Call Restriction.”
Outgoing Call Restriction
Use this procedure to restrict all extensions associated with the mail system unit
and the Remote Maintenance Device from making outside calls.
Security Alert:
1.
2.
3.
4.
5.
6.
7.
This procedure must be followed to limit the possibility of toll fraud abuse.
Press [
#
] [
4
] [
0
] [
1
].
At the Extension:
prompt, enter the extension number where the Remote
Maintenance Device (VMS-RMD) is installed as specified on
communications system Planning Form B1.
Press [
Next Data
] until the display reads
2 Inside Only.
Press [
Next Item
] or [
Prev Item
] until the first PARTNER MAIL extension number
specified on Form B1 is displayed.
Press [
Next Data
] until the appropriate value displays.
Repeat Steps 4 and 5 for each PARTNER MAIL extension.
Continue with “Line Assignment.”
NOTE:
If Outcalling is permitted, be sure to create Allowed and Disallowed
Phone Lists as needed for Outcalling numbers. Instructions are
provided in Chapter 4.
Line Assignment for the
Remote Maintenance Device
Use this procedure to remove all lines from the extension to which the Remote
Maintenance Device is connected.
Security Alert:
This procedure must be followed to limit the possibility of toll fraud abuse.
1.
Press [
#
] [
3
] [
0
] [
1
].
3-4
Mail System Initial Programming