Filter
Top Products
RL78/G1A APPENDIX A REVISION HISTORY
(3/8)
Edition Description Chapter
Modification of remark 1 in Figure 6-31. Operation Timing (In Capture & One-count
Mode : High-level Width Measurement)
Modification of description in 6.6.2 TOmn Pin Output Setting
Modification of Figures 6-34 to 6-36
Modification of description in Figures 6-43, 6-47, 6-55, 6-59, 6-63, 6-68, 6-78 Example
of Set Contents of Registers
Modification of Figures 6-45, 6-49, 6-57, 6-61, 6-65 Block Diagram
Modification of Figures 6-48, 6-52, 6-56, 6-60, 6-64, 6-69, 6-79 Operation Procedure
Modification of remark in 6.8.3 Operation as multiple PWM output function
CHAPTER 6 TIMER
ARRAY UNIT
Modification of 7.4.2 Shifting to HALT/STOP mode after starting operation
CHAPTER 7 REAL-TIME
CLOCK
Addition of caution in 9.1 Functions of Clock Output/Buzzer Output Controller
Modification of Figure 9-2. Format of Clock Output Select Register n (CKSn)
Addition of 9.5 Cautions of clock output/buzzer output controller
CHAPTER 9 CLOCK
OUTPUT/BUZZER
OUTPUT CONTROLLER
Modification of description in 10.1 Functions of Watchdog Timer, 10.4.4 Setting
watchdog timer interval interrupt
Modification of Figure 10-1 . Block Diagram of Watchdog Timer
CHAPTER 10
WATCHDOG TIMER
Figure 11-1. Block Diagram of A/D Converter
Deletion of note 3 and addition of cautions 1 and 2 to Figure 11-3. Format of A/D
Converter Mode Register 0 (ADM0)
Modification of description and addition of note and caution in Table 11-3. A/D
Conversion Time Selection
Modification of description and addition of note to Figure 11-7. Format of A/D
Converter Mode Register 2 (ADM2)
Addition of note to 11.3.5 10-bit A/D conversion result register (ADCR), and 11.3.6
8-bit A/D conversion result register (ADCRH)
Addition of note and caution 10 to Figure 11-11. Format of Analog Input Channel
Specification Register (ADS)
Addition of note and caution to 11. 3.10 A/D test register (ADTES)
Addition of caution to 11.3.12 Port mode control registers 0, 1, 3to 5, 7, 12 (PMC0,
PMC1, PMC3 to PMC5, PMC12)
Addition of note 1 to 11.4 A/D Converter Conversion Operations
Addition of caution to 11.7.4 Setup when temperature sensor output
voltage/internal reference voltage is selected (example for software trigger mode
and one-shot conversion mode)
Modification of description in 11.8 SNOOZE Mode Function
Modification of description in 11.9 (1) Resolution
Addition of caution to 11.10 (2) Input range of ANI0 to ANI14 and ANI16 to ANI26
pins
Modification of description in Figure 11-46. Analog Input Pin Connection
Modification of description in 11.10 (5) Analog input (ANIn) pins
Modification of description in 11.10 (6) Input impedance of analog input (ANIn) pins
Rev.0.03
Modification of value in Table 11-6. Resistance and Capacitance Values of
Equivalent Circuit (Reference Values)
CHAPTER 11 A/D
CONVERTER
R01UH0305EJ0200 Rev.2.00 976
Jul 04, 2013