Filter
Top Products
RL78/G1A CHAPTER 3 CPU ARCHITECTURE
R01UH0305EJ0200 Rev.2.00 56
Jul 04, 2013
Table 3-3. Vector Table (2/2)
Vector Table Address Interrupt Source
64-pin
48-pin
32-pin
25-pin
0042H INTTM04
√ √ √ √
0044H INTTM05
√ √ √ √
0046H INTTM06
√ √ √ √
0048H INTTM07
√ √ √ √
004AH INTP6
√ √ − −
004CH INTP7
√ − − −
004EH INTP8
√ √ − −
0050H INTP9
√ √ − −
0052H INTP10
√ − − −
0054H INTP11
√ − − −
005EH INTMD
√ √ √ √
0062H INTFL
√ √ √ √
007EH BRK
√ √ √ √
(2) CALLT instruction table area
The 64-byte area 00080H to 000BFH can store the subroutine entry address of a 2-byte call instruction (CALLT). Set
the subroutine entry address to a value in a range of 00000H to 0FFFFH (because an address code is of 2 bytes).
To use the boot swap function, set a CALLT instruction table also at 01080H to 010BFH.
(3) Option byte area
A 4-byte area of 000C0H to 000C3H can be used as an option byte area. Set the option byte at 010C0H to 010C3H
when the boot swap is used. For details, see CHAPTER 24 OPTION BYTE.
(4) On-chip debug security ID setting area
A 10-byte area of 000C4H to 000CDH and 010C4H to 010CDH can be used as an on-chip debug security ID setting
area. Set the on-chip debug security ID of 10 bytes at 000C4H to 000CDH when the boot swap is not used and at
000C4H to 000CDH and 010C4H to 010CDH when the boot swap is used. For details, see CHAPTER 26 ON-CHIP
DEBUG FUNCTION.