Filter
Top Products
RL78/G1A CHAPTER 29 ELECTRICAL SPECIFICATIONS (T
A = −40 to +85°C)
R01UH0305EJ0200 Rev.2.00 850
Jul 04, 2013
CHAPTER 29 ELECTRICAL SPECIFICATIONS (TA = −40 to +85°C)
This chapter describes the following electrical specifications.
Target products A: Consumer applications T
A = −40 to +85°C
R5F10E8AALA, R5F10E8CALA, R5F10E8DALA, R5F10E8EALA
R5F10EBAANA, R5F10EBCANA, R5F10EBDANA, R5F10EBEANA
R5F10EGAAFB, R5F10EGCAFB, R5F10EGDAFB, R5F10EGEAFB
R5F10EGAANA, R5F10EGCANA, R5F10EGDANA, R5F10EGEANA
R5F10ELCAFB, R5F10ELDAFB, R5F10ELEAFB
R5F10ELCABG, R5F10ELDABG, R5F10ELEABG
G:
Industrial applications When T
A
=
−
40 to +105
°
C products is used in the range of T
A
=
−
40 to +85
°
C
R5F10EBAGNA, R5F10EBCGNA, R5F10EBDGNA, R5F10EBEGNA
R5F10EGAGFB, R5F10EGCGFB, R5F10EGDGFB, R5F10EGEGFB
R5F10EGAGNA, R5F10EGCGNA, R5F10EGDGNA, R5F10EGEGNA
R5F10ELCGFB, R5F10ELDGFB, R5F10ELEGFB
Cautions 1. The RL78 microcontrollers have an on-chip debug function, which is provided for development
and evaluation. Do not use the on-chip debug function in products designated for mass
production, because the guaranteed number of rewritable times of the flash memory may be
exceeded when this function is used, and product reliability therefore cannot be guaranteed.
Renesas Electronics is not liable for problems occurring when the on-chip debug function is
used.
2. With products not provided with an EV
DD0 or EVSS0 pin, replace EVDD0 with VDD, or replace EVSS0
with VSS.
3. The pins mounted depend on the product. See 2.1 Port Function to 2.2.1 With functions for
each product.