Filter
Top Products
RL78/G1A
CHAPTER 30 ELECTRICAL SPECIFICATIONS (G: INDUSTRIAL APPLICATIONS T
A
=
−
40 to +105
°
C)
R01UH0305EJ0200 Rev.2.00 906
Jul 04, 2013
CHAPTER 30 ELECTRICAL SPECIFICATIONS
(G: INDUSTRIAL APPLICATIONS T
A = −40 to +105°C)
This chapter describes the following electrical specifications.
Target products G: Industrial applications T
A = −40 to +105°C
R5F10EBAGNA, R5F10EBCGNA, R5F10EBDGNA, R5F10EBEGNA
R5F10EGAGFB, R5F10EGCGFB, R5F10EGDGFB, R5F10EGEGFB
R5F10EGAGNA, R5F10EGCGNA, R5F10EGDGNA, R5F10EGEGNA
R5F10ELCGFB, R5F10ELDGFB, R5F10ELEGFB
Cautions 1. The RL78/G1A has an on-chip debug function, which is provided for development and evaluation.
Do not use the on-chip debug function in products designated for mass production, because the
guaranteed number of rewritable times of the flash memory may be exceeded when this function
is used, and product reliability therefore cannot be guaranteed. Renesas Electronics is not liable
for problems occurring when the on-chip debug function is used.
2. With products not provided with an EV
DD0 or EVSS0 pin, replace EVDD0 with VDD, or replace EVSS0
with V
SS.
3. The pins mounted depend on the product. See 2.1 Port Function to 2.2.1 With functions for
each product.
4. Please contact Renesas Electronics sales office for derating of operation under T
A = +85°C to
+105°C. Derating is the systematic reduction of load for the sake of improved reliability.
Remark When RL78/G1A is used in the range of T
A = −40 to +85°C, see CHAPTER 29 ELECTRICAL
SPECIFICATIONS (TA = −40 to +85°C).