Filter
Top Products
RL78/G1A CHAPTER 6 TIMER ARRAY UNIT
R01UH0305EJ0200 Rev.2.00 186
Jul 04, 2013
(3) Multiple PWM (Pulse Width Modulation) output
By extending the PWM function and using one master channel and two or more slave channels, up to seven types
of PWM signals that have a specific period and a specified duty factor can be generated.
Duty
Period
Interrupt signal (INTTMmn)
Duty
Period
Channel n (master)
Channel p (slave)
Channel q (slave)
Operation clock
Compare operation
Compare operation
Compare operation
Timer output
(TOmp)
Timer output
(TOmq)
Caution For details about the rules of simultaneous channel operation function, see 6.4.1 Basic rules of
simultaneous channel operation function.
Remark m: Unit number (m = 0), n: Channel number (n = 0 to 7(however, timer input pin (TImn), timer output pin
(TOmn) : n = 0, 1, 3 to 7)), p, q: Slave channel number (n < p < q ≤ 7)
6.1.3 8-bit timer operation function (channels 1 and 3 only)
The 8-bit timer operation function makes it possible to use a 16-bit timer channel in a configuration consisting of two 8-
bit timer channels. This function can only be used for channels 1 and 3.
Caution There are several rules for using 8-bit timer operation function.
For details, see 6.4.2 Basic rules of 8-bit timer operation function (channels 1 and 3 only).