Filter
Top Products
RL78/G1A APPENDIX A REVISION HISTORY
(10/11)
Page Description Classification
p.784 Modification of 22.3.7 Frequency detection function (c)
p.785
Modification of
22.3.7.1 Timer input select register 0 (TIS0)
(c)
p.786 Modification of 22.3.8 A/D test function (c)
p.787 Modification of Figure 22-15. Configuration of A/D Test Function (c)
p.788
Modification of
22.3.8.1 A/D test register (ADTES)
(c)
CHAPTER 24 OPTION BYTE
p.792, 793 Modification of 24.1.1 User option byte (000C0H to 000C2H/010C0H to 010C2H) (c)
p.795, 796 Modification of Figure 24-2. Format of User Option Byte (000C1H/010C1H) (c)
p.797 Modification of Figure 24-3. Format of Option Byte (000C2H/010C2H) (c)
p.799 Modification of 24.4 Setting of Option Byte (c)
CHAPTER 25 FLASH MEMORY
P.800 Modification of CHAPTER 25 FLASH MEMORY (c)
p.803
Modification of Table 25-1. Wiring between RL78/G1A and Dedicated Flash Memory
Programmer
(c)
p.804 to 806 Modification of Figures 25-1 to 25-4 (c)
p.803, 805, 806 Modification of Tables 25-1 to 25-3 (c)
p.807 Modification of 25.3 Connection of Pins on Board and 25.3.1 P40/TOOL0 pin (c)
p.808 Modification of 25.3.4 REGC pin (c)
p.810 Modification of 25.4.2 Flash memory programming mode (c)
p.811
Modification of Table 25-5. Programming Modes and Voltages at Which Data Can Be
Written, Erased, or Verified
(c)
p.812
Modification of 25.4.4 Communication commands and Table 25-7. Flash Memory Control
Commands
(c)
p.814
Modification of 25.5 Processing Time for Each Command When PG-FP5 Is in Use
(Reference Value)
(c)
p.815 Modification of 25.6 Self-Programming (c)
p.820 Modification of 25.7 Security Settings (c)
p.821 Modification of Caution in Table 25-13. Setting Security in Each Programming Mode (c)
p.822 Modification of 25.8.1 Data flash overview (c)
p.823 Modification of 25.8.3 Procedure for accessing data flash memory (c)
CHAPTER 26 ON-CHIP DEBUG FUNCTION
p.824
Modification of figure and Remark in Figure 26-1. Connection Example of E1 On-chip
Debugging Emulator
(c)
CHAPTER 28 INSTRUCTION SET
p.830 Modification of CHAPTER 28 INSTRUCTION SET (c)
p.833 to 849 Modification of Note in Table 28-5. Operation List (c)
CHAPTER 29 ELECTRICAL SPECIFICATIONS (TA = −40 to +85°C)
p.853 Modification of 29.2.1 X1, XT1 oscillator characteristics (c)
p.864 Modification of Note 1 in 29.3.2 Supply current characteristics (c)
p.866, 867
Modification of Minimum Instruction Execution Time during Main System Clock
Operation
(c)
Remark “Classification” in the above table classifies revisions as follows.
(a): Error correction, (b): Addition/change of specifications, (c): Addition/change of description or note,
(d): Addition/change of package, part number, or management division, (e): Addition/change of related
documents
R01UH0305EJ0200 Rev.2.00 967
Jul 04, 2013