Filter
Top Products
RL78/G1A CHAPTER 21 VOLTAGE DETECTOR
Notes 1. The LVIMK flag is set to “1” by reset signal generation.
2. After an interrupt is generated, perform the processing according to Figure 21-7 Processing Procedure
After an Interrupt Is Generated.
3. After a reset is released, perform the processing according to Figure 21-8 Initial Setting of Interrupt and
Reset Mode.
Remark V
POR: POR power supply rise detection voltage
VPDR: POR power supply fall detection voltage
R01UH0305EJ0200 Rev.2.00 766
Jul 04, 2013