Filter
Top Products
RL78/G1A APPENDIX A REVISION HISTORY
(3/11)
Page Description Classification
p.198 Modification of 6.3.2 Timer clock select register m (TPSm) (c)
p.199 Modification of Caution in Figure 6-10. Format of Timer Clock Select register m (TPSm) (c)
p.215 Modification of Figure 6-21. Format of Input Switch Control Register (ISC) (c)
p.216 Modification of 6.3.14 Noise filter enable register 1 (NFEN1) (c)
p.218 Modification of 6.3.15 Registers controlling port functions of pins to be used for timer I/O (c)
p.226 Modification of Remark in Figure 6-26. Operation Timing (In Event Counter Mode) (c)
p.227 Modification of Remark 1 (c)
p.245
Modification of Figure 6-44. Operation Procedure of Interval Timer/Square Wave Output
Function
(c)
p.251
Modification of Figure 6-48. Operation Procedure When External Event Counter Function
Is Used
(c)
p.254
Modification of Figure 6-51. Example of Set Contents of Registers During Operation as
Frequency Divider
(c)
p.255
Modification of Figure 6-52. Operation Procedure When Frequency Divider Function Is
Used
(c)
p.256 Modification of 6.8.4 Operation as input pulse interval measurement (c)
p.259
Modification of Figure 6-56. Operation Procedure When Input Pulse Interval
Measurement Function Is Used
(c)
p.261
Modification of Figure 6-57. Block Diagram of Operation as Input Signal High-/Low-Level
Width Measurement
(c)
p.264
Modification of Figure 6-60. Operation Procedure When Input Signal High-/Low-Level
Width Measurement Function Is Used
(c)
p.268 Modification of Figure 6-64. Operation Procedure When Delay Counter Function Is Used (c)
p.272
Modification of Figure 6-67. Example of Set Contents of Registers When One-Shot Pulse
Output Function Is Used (Master Channel)
(c)
p.274, 275 Modification of Figure 6-69. Operation Procedure of One-Shot Pulse Output Function (c)
p.279
Modification of Figure 6-72. Example of Set Contents of Registers When PWM Function
(Master Channel) Is Used
(c)
p.287
Modification of Figure 6-77. Example of Set Contents of Registers When Multiple PWM
Output Function (Master Channel) Is Used
(c)
p.291 Modification of 6.10.1 Cautions When Using Timer output (c)
CHAPTER 7 REAL-TIME CLOCK
p.292 Modification of 7.1 Functions of Real-time Clock (c)
p.294 Modification of Figure 7-1. Block Diagram of Real-time Clock (c)
p.295 Modification of 7.3 Registers Controlling Real-time Clock (c)
p.296 Modification of 7.3.1 Peripheral enable register 0 (PER0) (c)
p.298 Modification of 7.3.3 Real-time clock control register 0 (RTCC0) (c)
p.299, 300 Modification of 7.3.4 Real-time clock control register 1 (RTCC1) (c)
p.301 Modification of 7.3.5 Second count register (SEC) (c)
p.302 Modification of 7.3.7 Hour count register (HOUR) (c)
p.304 Modification of 7.3.8 Day count register (DAY) (c)
p.305 Modification of 7.3.9 Week count register (WEEK) (c)
Remark “Classification” in the above table classifies revisions as follows.
(a): Error correction, (b): Addition/change of specifications, (c): Addition/change of description or note,
(d): Addition/change of package, part number, or management division, (e): Addition/change of related
documents
R01UH0305EJ0200 Rev.2.00 960
Jul 04, 2013