Filter
Top Products
G-6
Q Auto Dial Enabled. If checked, you do not have to press the Dial button to initiate
a call. Note that if you find auto dialing to be slow you can decrease the Minimum
and Maximum Wait times.
12. Choose the Media \ Audio \ Devices tab. Under Microphone Settings and Speaker
Settings
, make sure that the correct audio devices on your PC are selected for voice
capture and audio.
13. Click OK or Apply to save your changes. If the configuration has been made correctly
the eyeBeam should show "Logged in - enter phone number" and "Your Number is
<username>". In the Settings dialog box you should also see a submenu under
SIP
Accounts
with the name/address of your Strata CS Server.
Launching the eyeBeam softphone __________________________
To use the eyeBeam softphone with Strata CS, do the following when you log on to ViewPoint:
1. Click Options to expand the Logon dialog box.
2. Select one of the following under Use this phone with ViewPoint:
Q If you have a properly-configured SIP phone external station (see “Configuring a
SIP phone” on page 6-14), simply choose Station ID and enter your station ID.
Q If you don’t have an external station, choose eyeBeam SIP softphone. If you have
more than one eyeBeam SIP account defined, use the dropdown list select the one
you defined in step
6 in the previous section.
Note: If you don’t have an external station, then make sure you have Imitate a station
when my incoming routing calls to external numbers checked (Tools > Options,
Phone tab).
3. Click OK.