Filter
Top Products
G-4
To install and configure an eyeBeam softphone
1. Install the softphone on the PC that will be using it.
2. Start the softphone. When prompted, enter the license key that you were supplied, and
click OK.
3. In the Audio Tuning Wizard, configure the phone with the desired audio settings. See
the eyeBeam documentation for how to set audio settings.
4. Next, the Settings dialog box opens. Choose the SIP Accounts \ Add a New SIP
Account \ Server tab.
Note: If you accidentally exit the dialog box, right-click anywhere on the eyeBeam
phone and choose Settings to open it again.
5. Check Enable this SIP account. This enables the eyeBeam phone to register with
Strata CS.
6. Under User details, enter the following information:
Q Display name. Enter your name as you want it displayed to callers.