Filter
Top Products
CHAPTER 12. PLACING CALLS IN VIEWPOINT 12-9
Entering an IP address
If you selected an H.323 or SIP Internet dialing service in the Call Using field, use the Address
field to enter one of the following:
Q For an H.323 Internet address, enter the IP address of the remote H.323 device or Strata
CS Server to which you want to connect. For example, 123.45.67.89 or abccorp.com.
Q For a SIP Internet address, enter the SIP URI of the party you want to call. For example,
sip:vwilliams@abccorp.com.
If the IP address connects you to an external H.323 Gateway, you can dial a phone number
through it by appending the phone number to the IP address. Separate the address from the
phone number with a slash character, for example, 123.45.67.89/6173540600.
If the IP address connects you to a remote Strata CS Server, you can append a user’s Direct
Inward Dial (DID) number in the same manner, for example, 123.45.67.89/2717. You cannot
append a user’s extension.
Checking a number
To confirm that Strata CS has correctly interpreted a number or address that you have
entered—for example, that it has recognized the correct country on an international call—click
next to the
Number or Address field. The Check Phone Number dialog box opens. You can
correct any dialing errors here before you place the call.
Note: The dialog will open automatically if the number you entered was unclear.
To check a phone number
1. Under Country/Region, make sure the correct country is selected.
2. Under City/Area code and Local number, confirm that Strata CS has interpreted the
number correctly.