Filter
Top Products
CHAPTER 8. USING STRATA CS VIEWPOINT 8-5
If you forget your own station ID, you can enter 0 for the Station ID, click OK, then
in the next window select
Use your default station.
Q Remote number. To use ViewPoint in conjunction with a phone that is not a Strata
CS station, select this field and enter the phone number or IP address of the phone.
As long as this ViewPoint session lasts, that phone will be the associated phone.
Click to choose advanced options for the number (see the next section,
“Specifying options for a remote number” ).
Q eyeBeam SIP softphone. This is the preferred softphone option for the highest
audio quality. See Appendix G, “Using the eyeBeam SIP softphone.”
Q Strata CS H.323 softphone. This option does not provide as high audio quality as
the SIP softphone. See
Appendix F, “Using the Strata CS H.323 SoftPhone.”
Q None. Choose this option to use ViewPoint without an associated phone.
ViewPoint commands that require a phone—for example, placing a call—will be
unavailable.
3. In Server, type the network name of a Strata CS Server computer on your network, or
click
to select one.
4. Click OK.
Specifying options for a remote number
If you selected Remote number, you can click to open the Check Phone Number dialog
box, where you can specify how Strata CS dials the number.
1. Under Address type, make sure the correct type of number is selected.
2. Under Call Using, either accept the default dialing service access code for the type of
number selected, or click
This access code and enter a different access code. Your
system administrator can tell you what access codes are available.
3. Under Country/Region, make sure that the correct country is selected.