Filter
Top Products
APPENDIX F. USING THE STRATA CS H.323 SOFTPHONE F-7
4. Click Add and enter an IP address (typically the IP address of the Strata CS Server's
Internet span), then click to add that IP address to the list of approved IP addresses.
Repeat to add multiple IP addresses.
Click Remove to remove the selected IP address from the list.
5. Click OK.
Keeping the keypad window always on top
To keep the SoftPhone keypad window always on top of other applications, choose View >
Always on top
from the keypad window.
Using the stand-alone SoftPhone ___________________________
You can use a lightweight, downloadable, stand-alone version of the SoftPhone without
ViewPoint. To install the stand-alone SoftPhone, open the ViewPoint Web Access login page
and at the bottom select the link
To use the Softphone option, install the Strata CS
Softphone
. When starting the stand-alone SoftPhone for the first time you must provide your
Strata CS Server's Internet Span IP Address.
When running, the SoftPhone appears as a blue keypad icon in the Windows notification area.
To exit the SoftPhone stand-alone application, right-click the SoftPhone system tray icon and
click
Exit.
Configuring the stand-alone SoftPhone
To set up the stand-alone SoftPhone to connect to Strata CS, do the following:
1. From the SoftPhone keypad window (see “Showing the SoftPhone keypad window”
on page F-5), choose Tools > Options. You can also right-click the SoftPhone icon in
the system tray and choose Options.
2. Click the Connection tab.
3. Specify the following information:
Q H.323 Gateway. Enter the computer name or IP address of the Strata CS Server's
H.323 span. (Depending on how your H.323 span is configured, the span's IP
address may be different from the Server's IP address.)
Q Extension. Enter your Strata CS extension.
Q Password. Enter your Strata CS password.
4. Click OK.