Filter
Top Products
CHAPTER 4 NDA-24282
Page 56
Revision 1.0
PH-PC27 (EAPI)
4. Lamp Indications
The contents of lamp indications of this circuit card are shown in the table below.
5. Switch Settings
Standard settings of various switches on this circuit card are shown in the table below.
LAMP NAME COLOR STATE
OPE/MB Green Remains lit while this circuit card is operating.
IOCOPE Red Remains lit while the non-protocol/RS-232C Port Controller is operating normally.
CLKALM Red Lights when a clock failure has occurred.
Note:
The PH-PC27 is a three port EAPI card.
SWITCH
NAME
SWITCH NO. SETTING
STANDARD
SETTING
MEANING
MB
UP Circuit card make busy.
DOWN Circuit card make idle.
MBR
UP
Requests the software to place the ACD-MIS
Interface Port Controller into make-busy state.
DOWN
Cancels the request to place the ACD-MIS
Interface Port Controller into make-busy state.
(Circuit card operating state)
SW0
1OFF×
2OFF×
3OFF×
4OFF×
5OFF×
6ON×
7OFF×
8ON×
Fixed