Filter
Top Products
NDA-24282 CHAPTER 4
Page 87
Revision 1.0
PA-IO02-A (IOC)
Note:
When setting SW02-7/SW12-7 to ON, set SW02-1/SW12-1 to ON, also.
SW02
(for Port 0)
SW12
(for Port 1)
1
ON ×
PB terminal becomes minus (-) when the port
terminal is busy.
OFF
PB terminal becomes plus (+) when the port
terminal is busy.
2
ON × Sets the ER terminal of the port to Always ON.
OFF
Controls ON/OFF of the ER terminal of the
port by the CPU.
3
ON DR signal lead is not to be used to the port.
OFF × DR signal lead is to be used to the port.
4
ON × CD signal lead is not to be used to the port.
OFF CD signal lead is to be used to the port.
5
ON CS signal lead is not to be used to the port.
OFF × CS signal lead is to be used to the port.
6
ON CI signal lead is not to be used to the port.
OFF × CI signal lead is to be used to the port.
7
ON × PB signal lead is not to be used to the port.
Note
OFF PB signal lead is to be used to the port.
8OFF× Not used.
SWITCH
NAME
SWITCH NO. SETTING
STANDARD
SETTING
MEANING