Filter
Top Products
CHAPTER 4 NDA-24282
Page 52
Revision 1.0
PH-PC22 (EAPI)
SWITCH
NAME
SWITCH NO. SETTING
STANDARD
SETTING
MEANING
SW01
(for Port 0)
SW11
(for Port 1)
(When using
ACD-MIS
Interface Port)
1
2
3
4
ON ×
Sets the non-protocol RS-232C port stop bit
length to 1 bit.
OFF
Sets the non-protocol RS-232C port stop bit
length to 2 bit.
5
ON ×
Sets the non-protocol RS-232C port data length
to 7 bit.
OFF
Sets the non-protocol RS-232C port data length
to 8 bit.
6
7
8
ON
Sets the polarity of non-protocol RS-232C PB
signal to Not Provided.
OFF ×
Sets the polarity of non-protocol RS-232C PB
signal to +, or sets PB signal to Provided.
SW01-1
SW11-1
SW01-2
SW11-2
SW01-3
SW11-3
NON-PROTOCOL RS-232C
PORT DATA SPEED SETTING
ON ON ON 300 bps
ON ON OFF 600 bps
ON OFF ON 1200 bps
ON OFF OFF 2400 bps
OFF ON ON 4800 bps
OFF ON OFF 9600 bps
OFF OFF ON 19200 bps
SW01-6
SW11-6
SW01-7
SW11-7
NON-PROTOCOL RS-232C PORT
PARITY BIT SETTING
ON ON ODD Parity Check
ON OFF EVEN Parity Check (standard setting)
OFF OFF No Parity Check is to be made