Filter
Top Products
NDA-24282 CHAPTER 7
Page 419
Revision 1.0
SYSTEM INFORMATION
Orig Detail Codes: Yes/No (Default = No)
Trim CP Trace Space: Yes/No (Default = No)
Large CP Trace Buffer: Yes/No (Default = Off)
Dash
Min Len: 1 to 16 (Default = 7)
Index 1 ~ 5: 0 to 11
Incoming Call Msg: IQ or Iq
Outbound Call Disp: IZ or Iz
Reclaim IVR Call to: Music/Ring Back
Work Key Press: Ready Mode/Disable Timer
MIS Split Capacity: 4/16 (Default = 4)
Use Infolink Split Information: No/Yes
Tenant Settings
1. Function
This command maintains the ACD’s system data tenant table. If the system is required to accept calls from
trunks/stations beyond the ACDTN range (1-10), this command allows the user to program these tenants.
Note that if this table is used, all tenants from which ACD calls might originate (including tenants 1-10)
must be programmed. As all ACD entities (splits, positions, etc.) must still reside in tenants 1-10, ACDTN
must still be programmed to provide the necessary tenant information.
2. Parameters
System Tenants: Highlight the number of the tenant to be updated, and select the Update option.
User Settings Tenant Settings Time Out Settings
Update
List
Close
System Data
Update System Data?
12345678910
11 12 13 14 15 16 17 18 19 20
21 22 23 24 25 26 27 28 29 30
31 32 33 34 35 36 37 38 39 40
41 42 43 44 45 46 47 48 49 50
51 52 53 54 55 56 57 58 59 60
>
<
System Tenants 1 ~ 60