Filter
Top Products
CHAPTER 7 NDA-24282
Page 340
Revision 1.0
ASYDL: ASSIGNMENT OF SYSTEM DATA INTO LOCAL DM (LDM)
Note 1:
For ACD system to be activated through Fusion network, this data is programmed in the node providing
ACDP only. Other data must be set to all nodes within Fusion network.
Note 2:
Available since the PBX software Series 7400 and the ACD software R3.
Note 3:
This data is used in the network providing multiple ACDPs.
Note 4:
The identical data value must be assigned to all nodes.
Note 5:
This data is necessary at all nodes. Assign the self FPC at the terminating node.
Note 6:
For ACD service provided within Fusion network, the data value (FPC) in these indexes must be pro-
grammed the same.
1 533 FPC of the node providing ACDP
1
864
1b
0
0/1 = Built-in IP, ACDP is not used/used
Note 1
b
1
Output the system message (4-R) when TCP-IP connection
is normally disconnected.
0/1 = Effective/Ineffective
b
2
0/1 = “AGENT ANYWHERE” is out of service/in service
Note 2, Note 3
b
3
0/1 = “Multiple ACDPs” is not available/available
Note 2
b
4
Assign number of ports of Status Monitoring for terminal
(SMFN).
Note 2, Note 4
b4 = 0, b5 = 0 (2 ports)
b4 = 1, b5 = 0 (8 ports)
b
5
865
FPC of the node providing IP.
(Assign 0 when the ACD service is activated in the self node
only.)
FPC: 1-253 (01 Hex – FD Hex)
Note 5, Note 6
866
FPC of the node providing ACDP
(Assign 0 when the ACD service is activated in the self node
only.)
FPC: 1-253 (01 Hex – FD Hex)
Note 5, Note 6
System Data (LDM) -1 Programming Sheet
SYSTEM
DATA
TYPE
(SYS)
SYSTEM
DATA
INDEX
(INDEX)
512-1535
DATA
(DATA)
00 – FF
(Hex)
BIT
CORRESPONDING
DATA
SYSTEM DATA CONTENTS
DATA
0/1
BIT