Filter
Top Products
CHAPTER 7 NDA-24282
Page 346
Revision 1.0
ASFC: ASSIGNMENT OF SERVICE FEATURE RESTRICTION CLASS DATA
ASFC: Assignment of Service Feature Restriction Class Data
1. Function
This command is used to assign and display Service Feature Restriction information according to the
Service Feature Restriction Class (SFC) of the Station.
2. Precautions
1. For the SFC of ACD line of an agent position, be sure to assign RES = 1 (A Direct call is restricted) for
SFI = 95 (Direct Call Restriction). Assign RES = 0 (A Direct call is allowed) for SFC of non-ACD-lines
2. For details of SFIs other than SFI = 95, refer to “ASFC” command table in NEAX2400 IMX Office Data
Specification
3. Service Feature Restriction Class data programmed in this command must be set to all nodes to be
provided ACD trunk for Fusion network.
3. Parameters
DAY/NIGHT: Day/Night Mode
D= Day Mode
N= Night Mode
TN: Tenant Number
SFC: Service Restriction Class (0 ~ 15)
SFI: Service Feature Index (1 ~ 255) (Enter 95.)
95= 1 Direct Call Restriction (for ACD)
118= Live Record (for AD-16/40 vm)
RES: Restriction Data
0= Restricted
1= Allowed
Note:
When WRT? = Y is entered the value of the SFC automatically increases by one.