Filter
Top Products
NDA-24282 CHAPTER 7
Page 333
Revision 1.0
CHAPTER 7 PBX AND ACD COMMAND PROGRAMMING
1. GENERAL
This chapter explains the commands which are used exclusively for the NEAX2400 CallCenterWorX-Enter-
prise ACD system. For other related commands, refer to the NEAX2400 IMX Office Data Specification. When
engaging in command operations concerning the ACD system, ensure to use both this manual and NEAX2400
IMX Office Data Specification.
2. COMMANDS
2.1 NEAX2400 IMX COMMANDS
For ACD commands, see Section 2.2, “ACD Commands” in this chapter.
Note:
Assign “1” to parameter “OAI” of “MMNF” command prior to using OAI command.
Table 7-1 NEAX2400 IMX Command List in Alphabetical Order
COMMAND
NAME
FULL NAME
AADT Assignment of Announcement/Dictation Trunks
AADTN Assignment of Announcement/Dictation Trunks for NDM
ACNO Assignment of Conversion Number Data
ACNOL Assignment of Conversion Number Data for LDM
ACNON Assignment of Conversion Number Data for NDM
AKYD
Assignment of Key Data for D
term
ALGNN Assignment of Telephone Number Data for NDM
ALGSN Assignment of Telephone Station Data for NDM
AMNO Assignment of Monitored Number
AMNOL Assignment of Monitored Number for LDM
AMNON Assignment of Monitored Number for NDM
AOKC Assignment of OAI Key Code
ASDT Assignment of Station Data
ASFC Assignment of Service Feature Restriction Class Data
ASYD Assignment of System Data
ASYDL Assignment of System Data into Local DM (LDM)
ASYDN Assignment of System Data in NDM