Filter
Top Products
NDA-24282 CHAPTER 7
Page 337
Revision 1.0
ASYD: ASSIGNMENT OF SYSTEM DATA
Note 1:
This bit is always set to “1”.
Note 2:
This bit is set to “1” for dual ACDP’s. If single ACDP, this bit is set to “0”. This bit is always set to “0”
for internal ACDP.
Note 3:
The announcement service for fusion network, “1 = DAT control” is not available.
System Data-1 Programming Sheet
SYSTEM
DATA
TYPE
(SYS)
SYSTEM
DATA
INDEX
(INDEX)
0 ~ 511
DATA
(DATA)
00 ~ FF
(Hex)
BIT
CORRE-
SPONDING
DATA
SYSTEM DATA CONTENTS
DATA
0/1
BIT
1
89 b
3
CPU ACT/ST-BY Change Function
0=Out of Service; 1=In Service
207
b
0
ACDP (No. 0 System) Mounting Status Indication
0/1 = Not Mounted/Mounted
Note 1
b
1
ACDP (No. 1 System) Mounting Status Indication
0/1 = Not Mounted/Mounted
Note 2
241
1b
2
Call Event Processing
0/1 = Invalid/Valid (Always assign 1)
1b
3
Details of SCF Error Notification
0/1 = Ineffective/Effective
448 1 b
1
Higher ACDP controlling capability
449
b
0
SCF Call origination from the first party notification
0/1 = Ineffective/Effective
b
2
Access to Announcement trunk is controlled:
0 = by the timer
1 = by the DAT
Note 3