Filter
Top Products
CHAPTER 7 NDA-24282
Page 334
Revision 1.0
ASYD: ASSIGNMENT OF SYSTEM DATA
ASYD: Assignment of System Data
1. Function
This command is used to assign and change system data in the NEAX2400 IMX.
2. Precautions
1. ASYD is divided into three sections, as follows:
a. Assignment of System Data-1.
(SYS 1) - System-wide control parameters.
b. Assignment of System Data-2.
(SYS 2) - Service feature availability, on a tenant basis.
c. Assignment of System Data-3.
(SYS 3) - System-wide ringing patterns and hookswitch timing.
2. Only ASYD System Data-1 parameters relate to the functioning of ACD system.
3. System data must be entered using hexadecimal numbers. Refer to the ACD system Job Specification
for the applicable system data.
3. Parameters
SYS: System Data Items
1: System Data 1
2: System Data 2
3: System Data 3
TN: Tenant Number
INDEX: System Data Index
SYS INDEX
1 0-511
20-15
30-31
DATA: System Data (Hexadecimal)