Filter
Top Products
NDA-24282 CHAPTER 3
Page 35
Revision 1.0
INSTALLATION
b. When Installing ACD Trunk into Multiple Fusion Nodes (Software installation when the ACD trunk is in-
stalled at Fusion Nodes.)
(1) At the node that uses the ACDP, the ACD software (Built-in ACDP software) and ACD Option Soft-
ware installation is necessary.
(2) At the node that accommodates the ACD trunk, only ACD Option Software installation is necessary.
Do not install the ACD software.
(3) Initialize the node that uses the ACDP after the software installation.
c. When Installing ACD Agent Position into Multiple Fusion Nodes (For PBX Software Series 7300 or later)
(1) At the node that uses the ACDP, the ACD software (Built-in ACDP software) and the basic ACD
Option Software, installation is necessary.
(2) At the node that accommodates the ACD trunk, ACD agent position, the basic ACD Option Service
Software must be installed.
(3) Initialize the node that uses the ACDP after the software installation.
d. When Installing ACDP into Multiple Fusion Nodes (For PBX Software Series 7400 or later)
(1) At the node that uses the ACDP, the ACD software (Built-in ACDP software) and ACD Option Soft-
ware installation is necessary.
(2) At the node that accommodates the ACD trunk, only ACD Option Software installation is necessary.
Do not install the ACD software.
(3) Initialize the node that uses the ACDP after the initialization of the other nodes (non-ACDP nodes).