Filter
Top Products
CHAPTER 7 NDA-24282
Page 344
Revision 1.0
ASDT: ASSIGNMENT OF STATION DATA
ASDT: Assignment of Station Data
1. Function
This command is used to assign, delete and display station data. If the station number designated has al-
ready been assigned, the current data is displayed. If new data is to be assigned, the old data must be deleted
before the new data can be entered.
2. Precautions
1. The Route Restriction Class data (RSC) works in conjunction with the Assignment of Route Restriction
Data command (ARSC).
2. The Service Feature Restriction Class data (SFC) works in conjunction with the Assignment of Service
Feature Restriction Class command (ASFC).
3. When the station to be deleted is busy, an error indication is provided.
4. If station data is deleted, the data of the stations assigned by the AKYD command is also deleted.
3. Parameters
TN: Tenant Number
STN: Station Number
LENS: Line Equipment Number (6 digits)
TEC: Telephone Equipment Class (1 ~ 31)
3= DP/PB (for Hot position) / (Analog position)
12= D
term
(for My-Line)
18= Virtual Line Appearance (for ACD Line)
RSC: Route Restriction Class (0 ~ 15)
For assignment of RSC from ARSC command.
SFC: Service Feature Class (0 ~ 15)
For assignment of SFC from ASFC command.
Note:
For the ACD lines (Virtual Lines), the SFC must be separate from all other SFCs in the system.
This does not apply to Hot Positions or Analog Positions.
Note:
Stations must be programmed in the Network Node. Use ALGSN command.