Filter
Top Products
NDA-24282 (E) CHAPTER 4
Page 167
Revision 1.0
PA-CC98 (ETHER)
SWITCH
DIP SW
No.
SETTING
DEFAULT
SETTING
MEANING
SW0
(8 DIP Switches)
1
ON Sets 0, corresponding to bit 0 of MAC address
OFF Sets 1, corresponding to bit 0 of MAC address
2
ON Sets 0, corresponding to bit 1 of MAC address
OFF Sets 1, corresponding to bit 1 of MAC address
3
ON Sets 0, corresponding to bit 2 of MAC address
OFF Sets 1, corresponding to bit 2 of MAC address
4
ON Sets 0, corresponding to bit 3 of MAC address
OFF Sets 1, corresponding to bit 3 of MAC address
5
ON Sets 0, corresponding to bit 4 of MAC address
OFF Sets 1, corresponding to bit 4 of MAC address
6
ON Sets 0, corresponding to bit 5 of MAC address
OFF Sets 1, corresponding to bit 5 of MAC address
7
ON Sets 0, corresponding to bit 6 of MAC address
OFF Sets 1, corresponding to bit 6 of MAC address
8
ON Sets 0, corresponding to bit 7 of MAC address
OFF Sets 1, corresponding to bit 7 of MAC address
Note:
For switch setting for MAC address, refer to [Reference] shown below in the
setting of SW1. For details of switch setting for Internet address, refer to the
AIPT command explained in Chapter 7, ”PBX and ACD Command Pro-
gramming”.
SW1
(8 DIP Switches)
1
ON Sets 0, corresponding to bit 8 of MAC address
OFF Sets 1, corresponding to bit 8 of MAC address
2
ON Sets 0, corresponding to bit 9 of MAC address
OFF Sets 1, corresponding to bit 9 of MAC address
3
ON Sets 0, corresponding to bit 10 of MAC address
OFF Sets 1, corresponding to bit 10 of MAC address
1 2 3 4 5 6 7 8
ON
1 2 3 4 5 6 7 8
ON