Filter
Top Products
CHAPTER 7 NDA-24282
Page 402
Revision 1.0
ACDTG: ASSIGNMENT OF ACD TRUNK GROUP DATA
ACDTG: Assignment of ACD Trunk Group Data
1. Function
This command is used to assign, list, print, and remove ACD trunk group data. This data includes queue
priority, circuit quantity, and an optional trunk group name.
2. Precautions
1. If ACD circuits are not assigned, they will not report to the MIS.
2. Queue Priority for ACD trunk is programmed in ACDTG.
3. Parameters
TENANT NUMBER: Tenant Number (1 ~ 10) 0: indicates all tenants
TRUNK GROUP: Trunk Group Number (Rt. Number) (1 to 254)
NAME: Trunk Group (Rt.) Name (optional, up to 20 characters).
Only 12 will show on ACD position.
PRIORITY: Priority (1 to 250)
TRK: Trunk Numbers (1 ~ 255)
Trunk Group
Tenant Number: Trunk Group:
Name Priority:
1 ACD FPC40
1
1
Update
List
Close
Trunk Group Data
New Trunk Group
12345678910
11 12 13 14 15 16 17 18 19 20
21 22 23 24 25 26 27 28 29 30
31 32 33 34 35 36 37 38 39 40
41 42 43 44 45 46 47 48 49 50
51 52 53 54 55 56 57 58 59 60
61 62 63 64 65 66 67 68 69 70
>
<
1 - 70