Filter
Top Products
CHAPTER 7 NDA-24282
Page 342
Revision 1.0
AOKC: ASSIGNMENT OF OAI KEY CODE
AOKC: Assignment of OAI Key Code
1. Function
This command is applied to define the usage of D
term
buttons (line/feature key and flex key).
2. Precautions
1. AOKC must be programmed before AKYD is programmed.
2. For station assignment, the OAI Key Codes correspond to the Function Key Code (FKY) range from 34
through 47 (refer to AKYD).
3. After the OAI key code data is changed or deleted by this command or the system initial is executed,
newly programmed data is invalid for the first operation.
4. OAI key code data programmed in this command must be set to all nodes to be provided ACD service
for Fusion network.
3. Parameters
KEY-CODE: OAI Key Code (1-31)
F-KIND: Kind of Facility
1= (MSF) Terminal Mode Set Facility
2= (TMF) Terminal Multiple Information Transfer Facility
3= (OAC) OAI Access Code Request
4= (KTF) Key Code Transfer Facility
5~15= Not used
C-TONE: Confirmation Tone
0 = Confirmation Tone
1 = No Tone
NND: Number of Necessary Digits (available for F-KIND=3 only)
OP-CODE: Operation Code
128 thru 191 (for F-KIND = 1)
192 thru 255 (for F-KIND = 2)
Note 1:
The following operation codes are not available for OAI system when OAI system and ACD system are used
in the same Fusion network.
When F-KIND=1 (MSF) OP-CODE 185~191
When F-KIND=2 (TMF) OP-CODE 248~255