Filter
Top Products
CHAPTER 7 NDA-24282 (E)
Page 366
Revision 1.0
AADT: Assignment of Announcement/Dictation Trunks
AADT: Assignment of Announcement/Dictation Trunks
1. Function
This command is used to assign, display and delete announcement trunks for delay announcements, night
announcements, etc. Also used to assign, display and delete Dictation Trunks for such purposes as
Emergency Recorder.
2. Precautions
Before LENS of announcement trunks or night announcement is changed in ATRK, the AADT command
data should be deleted. In addition, if LENS data is deleted in ATRK by accident, this command data is also
deleted automatically.
3. Parameters
TYPE: 1 = ANT (Announcement Trunk)
2 = DCT (Dictation Trunk)
NO: ANT/DCT Number
Announcement = 1 ~ 58
Dictation = 1 ~ 5
D: Availability of Disconnect Timer (Available for TYPE = 1)
0 = Disconnect timer not available
1 = Disconnect timer available (normal)
Note 1
MSGT: Message Timer (2 ~ 120 sec. 2-sec. interval when shorter than 30 sec. 8-sec. interval
when longer than 30 sec.)
CP: Connection Pattern
Note 2
0 = Multiple Connection
1 = Single Connection
WAIT: Waiting Timer (0~30sec. 2sec. interval)
Note 2
CNT: Number of Announcement/Dictation Trunks (1 ~ 8)
RT: Route Number (1 ~ 255)
TK: Trunk Number (1 ~ 255)
Note 1:
When D=1, msg disconnect timer is set at 30 seconds.
Note 2:
Available only when the system data is programmed that the DAT control function is available (ASYD,
SYS1, INDEX449, b2 = 1).