Filter
Top Products
NDA-24282 CHAPTER 7
Page 341
Revision 1.0
ASYDN: ASSIGNMENT OF SYSTEM DATA IN NDM
ASYDN: Assignment of System Data in NDM
1. Function
This command is used to specify the system data for the Fusion Network.
2. Precautions
1. The data assigned by this command determines the service condition which affects the other nodes in
the Fusion Network.
2. Data for ASYDN assigned at Network Control Node (NCN) has priority over data for ASYDL assigned
at LN (Local Node) in the Fusion Network.
3. The ASYDN command consists of SYS1, INDEX 0 - 1535.
4. For more details, see the “Fusion System Manual”.
System Data (NDM) Programming Sheet
SYSTEM
DATA
TYPE
(SYS)
SYSTEM
DATA
INDEX
(INDEX)
0-1535
DATA
(DATA)
00 – FF
(Hex)
BIT
CORRESPONDING
DATA
SYSTEM DATA CONTENTS
DATA
0/1
BIT
1
514
Network Data Memory (NDM) usage. Assign data “1 (the
memory block is used)” for the corresponding memory block.
533 FPC number of the node that has the standard VNDM (1-253).
bit Memory Block
b
0
Memory Block 0
b
1
Memory Block 1
b
2
Memory Block 2
b
3
Memory Block 3
b
4
Memory Block 4