Filter
Top Products
NDA-24282 (E) CHAPTER 9
Page 437
Revision 1.0
SYSTEM MAINTENANCE
3. SYSTEM MESSAGES
3.1 SYSTEM MESSAGES AND THEIR MEANINGS
The system messages shown in Table 9-2 is displayed when faults occur with the ACD within the IMX system.
This table shows the system messages and their meaning.
Table 9-2 System Messages for MIS
SYSTEM
MESSAGE
MEANING FAULT CONTENTS
4-R TCP/IP Link Failure
A fault has occurred to the UAP or to the line connected with the
external computer.
5-Q ACD-MIS LOCK UP
Abnormal occurrence, and the communication between ACDP and
MIS has locked up. (To be displayed when ASYD command, SYS 1,
INDEX 42, b2 = “1”.)
6-H Bad Call Notification This message is issued to indicate the result of Bad Call Notification.
26-V
LAN Interface Error
Report
A fault, related to the TCP/IP connection between the PBX and MIS/
HOST, occurred.