Filter
Top Products
Advanced Operational Parameters
A-219 41-001343-02 REV04 – 05.2014
BroadSoft BroadWorks Executive and Assistant Services Settings
Parameter –
recording periodic beep
Configuration Files
aastra.cfg, <mac>.cfg
Description Specifies how often (in seconds) the periodic beep tone (notifying users that their call is
being recorded) should be played.
Format Integer
Default Value 15 (seconds)
Range 0 (Disabled)
15
30
45
60
Example recording periodic beep: 30
Parameter –
recording beep direction
Configuration Files
aastra.cfg, <mac>.cfg
Description Specifies where the periodic beep tone (notifying users that their call is being recorded)
should be played.
Format Integer
Default Value 1 (Network)
Range 0-2
0 (Local)
1 (Network)
2 (Both Local and Network)
Example recording beep direction: 2
Notes:
• This feature is not supported for the 6735i, 6737i, 6863i, 6865i, and 6867i in Release 3.3.1 SP3.
• Applicable to the 6730i, 6731i, 6753i, 6755i, 6757i, 6757i CT, 9143i, 9840i, and 9840i CT IP Phones only.
Parameter–
sip execassist filter call prefix
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Specifies the prefix of the Alerting Custom Calling Line ID name configured for Execu-
tives. For an incoming call, the phone will treat the call as a filtered call if the prefix is
found in the front of the display name of the FROM header of the INVITE. The prefix from
the display name of the FROM header or PAI header will be stripped before it is displayed
on the phone’s screen.
For example, if the From header sent by the BroadWorks call manager SIP INVITE mes-
sage is:
From:”[F] Filtrage -> Dupont, Francois”<sip:5551234567@as.
aastra.com;user=phone>
then the IP phone displays the calling name as “Filtrage -> Dupont, Francois” since the
“[F]” prefix is removed.
Format String (in quotations)
Default Value "[F]"
Range N/A
Example sip execassist filter call prefix: "[F]"