Filter
Top Products
Operational Features
5-194 41-001343-02 REV04 – 05.2014
3. Click on Basic Settings->Preferences->General.
Note:
If there is no CFWD key configured on the phone or it is removed, you can still set the CFWD modes via the IP Phone UI at the path Options-
>Call Forward.
4. In the “Call Forward Key Mode” field, select a call forward mode to use on the phone.
Valid values are: Account, Phone, Custom. Default is Account.
• Account
The account mode allows you to configure CFWD on a per account basis. Pressing a configured CFWD key applies to the account in focus.
• Phone
The Phone mode allows you to set the same CFWD configuration for all accounts (All, Busy, and/or No Answer). When you configure the
initial account, the phone applies the configuration to all other accounts. (In the Aastra Web UI, only the account you configured is ena-
bled. All other accounts are grayed out but set to the same configuration.) Using the Aastra Web UI, if you make changes to that initial
account, the changes apply to all accounts on the phone.
• Custom
The Custom mode allows you to configure CFWD for a specific account or all accounts. You can configure a specific state (All, Busy, and/or
No Answer) for each account independently or all accounts. On 3-Line LCD phones, you can set all accounts to ALL On or ALL Off. On the
8 and 11-Line LCD phones, you can set all accounts to All On, All Off, or copy the configuration for the account in focus to all other
accounts using a CopytoAll softkey.
Notes:
• If there is no CFWD key configured on the phone or it is removed, you can still set the CFWD modes via the IP Phone UI at the path Options-
>Call Forward.
• If there is only one account configured on the phone, then the mode setting is ignored and the phone behaves as if the mode was set to
“Phone”.
• When configuring a CFWD state (All, Busy, No Answer) for an account, you must configure a CFWD number for that state in order for the
state to be enabled.
5. Click Save Settings to save your changes.
The change takes effect immediately without a reboot.
Aastra Web UI