Filter
Top Products
Operational Features
5-34 41-001343-02 REV04 – 05.2014
Configurable Bluetooth Support
Administrators now have the option of enabling or disabling Bluetooth functionality on the 6739i IP phone. By defining
the “audio bluetooth” parameter as “0” in the configuration files, Bluetooth functionality will be completely disabled
and all Bluetooth-related options in the 6739i’s native User Interface (UI), along with the Bluetooth-related references in
the phone’s Web UI, will be inaccessible.
Administrators can re-enable Bluetooth functionality by defining the “audio bluetooth” parameter as “1” in the configu-
ration files.
Configuring Bluetooth Support Using the Configuration Files
Use the following parameters to configure Bluetooth support using the configuration files.
5. If you select “Off”, press Done to save your setting.
6. Press Set or Done to save your setting. The setting applies immediately to the phone.
For the 6739i:
1.
Press on the phone to enter the Options List.
2. Press the <Audio> button.
3. Press the <Headset Device> button. The following values display:
• Wired (default)
• DHSG
• Bluetooth
4. Press the value you want to set for the headset device.
5.
Press the to return to the previous menu or press the to return to the idle screen.
For the 6867i:
1.
Press to enter the Options List.
2.
Navigate to the Audio > Headset option and press the button or Select softkey.
3.
Press the
2 key to highlight DHSG.
4.
With DHSG highlighted press the
4 key to move to selection column.
5.
Use the
5 and 2 keys to scroll through and choose whether or not to enable DHSG. Valid values are:
• DHSG is OFF (default)
• DHSG is ON
6. Press the Save softkey to save your changes.
Note:
Applicable to the 6739i IP Phone only.
Note:
Bluetooth functionality is enabled by default.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section, “Bluetooth Support Settings” on pageA-57.
IP Phone UI