Aastra Telecom 41-001343-02 IP Phone User Manual


  Open as PDF
of 876
 
Operational Features
5-242 41-001343-02 REV04 – 05.2014
You can also use the following attributes/options with the XML objects to further customize your XML applications:
Attribute/Option Description/Usage Valid Values
Beep Enables or disables a BEEP option to indicate a status
on the phone.
Use with:
XML object (See the Aastra XML Developer’s Guide)
Configuration files (See page5-241)
Aastra Web UI (See page5-241)
yes | no
Default = no
Note:
This value is case sensitive.
Clickable PhoneStatus Object (6739i only) On the 6739i, the status messages are displayed in a
“box” on the idle screen, which is also used by the
phone to display missed calls. This “box” can either be
flat or a button the user can press if an URI has been
sent along with the XML object.
Use with:
XML object (See the Aastra XML Developer’s Guide)
some URI
xml status scroll delay (config files)
Status Scroll Delay (seconds) (Web UI)
Allows you to set the time delay, in seconds, between
the scrolling of each status message on the phone.
Use with:
Configuration files (See page5-241)
Aastra Web UI (See page5-241)
1 to 25
Default = 5
XML Unit Scroll Tag (6739i only) Allows you to change the behavior of the scrolling
and mimic the behavior of the 6757i (the arrow keys
move the selected item one by one).
Use with:
XML object (See the Aastra XML Developer’s Guide)
yes | no
Default = no
Note:
6739i Only.
XML Scroll Up and Scroll Down Tags Supports the new tags “scrollUp” and “scrollDown”
that are triggered when the scrolling reaches the top
or the bottom of the menu items.
Use with:
XML object (See the Aastra XML Developer’s Guide)
some URI
Timeout Specifies a timeout value for the LCD screen display.
Use with:
XML object (See the Aastra XML Developer’s Guide)
0, 30, 45, 60
Default =45
XML Get Timeout Specifies a timeout value, in seconds, that the phone
waits for the far side to return a response after accept-
ing the HTTP GET connection.
Use with:
Configuration Files (See page5-242)
0 to 2147483647 seconds
Default =0 (never timeout)
LockIn Specifies whether or not the information on the LCD
screen stays displayed when other events occur (such
as pressing buttons on the keypad).
Use with:
XML object (See the Aastra XML Developer’s Guide)
yes | no
Default = no
CancelAction Specifies a URI that the phone executes a GET on
when the user presses the default CANCEL key.
Use with:
XML object (See the Aastra XML Developer’s Guide)
F
ully qualified URI
For example:
cancelAction=
http://10.50.10.117/ft.xml
 previous next