Operational, Basic, and Advanced Parameters
41-001343-02 REV04 – 05.2014 A-112
PIN Suppression
LLDP-MED and ELIN Settings
Parameter–
pin suppression dial plan
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Allows a pattern based configuration of the PIN suppression.
Format Alphanumeric characters
Symbol
Description
0, 1, 2, 3, 4, 5, 6, 7, 8, 9 Digit symbol
X Match any digit symbol (wildcard)
*, #, . Other keypad symbol; # can terminate a
dial string
| Expression inclusive OR
+ 0 or more of the preceding digit symbol
or [] expression
[] Symbol inclusive OR
- Used only with [], represent a range of
acceptable symbols; For example, [2-8]
“,” (open/close quotes) In the configuration files, enter the sip
dial plan value using quotes.
( ) Controls the masking of the pin. In the
configuration files, enter the pin inside the brackets
().
Default value NA
Range Up to 512 alphanumeric characters
Example pin suppression dial plan: "*11*(x+)*(x+)#"
Parameter–
lldp
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Enables or disables Link Layer Discovery Protocol for Media Endpoint Devices (LLDP-
MED) on the IP Phone.
Format Boolean
Default Value 1 (enabled)
Range 0 (disabled)
1 (enabled)
Example lldp: 0
Parameter–
lldp interval
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description The amount of time, in seconds, between the transmission of LLDP Data Unit (LLDPDU) pack-
ets. The value of zero (0) disables this parameter.
Format Integer
Default Value 30
Range 0 - 2147483647
Example lldp interval: 60