Filter
Top Products
Advanced Operational Parameters
41-001343-02 REV04 – 05.2014 A-218
Active VoIP Recording Settings
Warning!
When a recording session is in progress, the respective IP phones display a recording icon on screen. The recording icon
is displayed on the IP phones to indicate the recording session is active and that a duplicate copy of the RTP/SRTP
stream is to be sent from the phone to the recording server. The overall recording and its quality is dependent on the
recording server and the network.
Parameter –
recorder addressN
(N is a number from 1 to 6)
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Specifies a trusted IP address (maximum of six) corresponding to the voice recording sys-
tem. The IP phone will check and respond to SIP messages coming from these IP
addresses on the port defined by the “sip services port” parameter.
Note:
If all of the “recorder addressN” parameters are left undefined, the active IP voice record-
ing feature is disabled.
Format IP Address
Default Value N/A
Range N/A
Example recorder address1: 192.168.1.20
recorder address2: 192.168.1.21
recorder address3: 192.168.1.22
recorder address4: 192.168.1.23
recorder address5: 192.168.1.24
recorder address6: 192.168.1.25
Parameter –
recording destinationN
(N is a number from 1 to 6)
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Specifies trusted IP addresses (maximum of six) corresponding to the destination where
the RTP/SRTP packets should be sent. The IP phone will check to see if the destination IP
addresses are trusted before sending the duplicated RTP/SRTP packets.
Note:
If all of these parameters are left undefined, no authentication checks will be performed.
Format IP Address
Default Value N/A
Range N/A
Example recorder address1: 192.168.1.20
recorder address2: 192.168.1.21
recorder address3: 192.168.1.22
recorder address4: 192.168.1.23
recorder address5: 192.168.1.24
recorder address6: 192.168.1.25