Filter
Top Products
Operational, Basic, and Advanced Parameters
41-001343-02 REV04 – 05.2014 A-22
Parameter –
auto resync mode
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Determines whether the configuration server automatically updates the configuration
files only, the firmware only, both the firmware and configuration files, or disables auto-
matic updates.
This parameter works with TFTP, FTP, HTTP and HTTPS servers.
Valid values are:
• None (0) - Disable auto-resync
• Configuration Files (1) - Updates the configuration files on the IP phone automati-
cally at the specified time if the files on the server have changed.
• Firmware (2) - Updates the firmware on the IP phone automatically at the specified
time if the files on the server have changed.
• Both (3) - Updates the configuration files and firmware automatically at the specified
time if the files on the server have changed.
Notes:
• If a user is accessing the Aastra Web UI, they are not informed of an auto-reboot.
• Any changes made using the Aastra Web UI or the IP phone UI are not overwritten by an
auto-resync update. Auto-resync affects the configuration files only. However, the set-
tings in the Aastra Web UI take precedence over the IP phone UI and the configuration
files.
• The resync time is based on the local time of the IP phone.
• If the IP phone is in use (not idle) at the time of the resync check, the reboot occurs
when the phone becomes idle.
• The automatic update feature works with both encrypted and plain text configuration
files.
Format Integer
Default Value 0
Range 0 (none)
1 (configuration files only)
2 (firmware only)
3 (configuration files and firmware)
Example auto resync mode: 1