Filter
Top Products
Operational Features
41-001343-02 REV04 – 05.2014 5-69
Use the following parameters to configure preferred line focus using the Aastra Web UI.
Goodbye Key Cancels Incoming Call
You can configure the Goodbye key to drop active calls or ignore incoming calls using the “goodbye cancels incoming
call” parameter or through the Web UI. This parameter controls the behavior of the goodbye key when the phone is on an
active call and a second call is presented to the phone.
How it Works
When you enable this parameter (1 = enable in the configuration files), which is the default, the Goodbye key rejects the
incoming call. When you disable this parameter (0 = disable in the configuration files), the Goodbye key hangs up the
active call.
Aastra Web UI
1. Click on Basic Settings->Preferences->General.
2. In the “Preferred Line” field, select a preferred line to switch focus to after incoming or outgoing calls end on the phone. Valid values are:
• None (disables the preferred line focus feature)
• 1 to 9
Default is 1.
For example, if you set the preferred line to “1”, when a call (incoming or outgoing) ends on the phone (on any line), the phone switches
focus back to Line 1.
3. In the “Preferred Line Timeout” field, enter the amount of time, in seconds, that the phone switches back to the preferred line after a call
(incoming or outgoing) ends on the phone, or after a duration of inactivity on an active line. Default is 0. Valid values are 0 to 999.
4. Click Save Settings to save your changes.