Filter
Top Products
Operational Features
41-001343-02 REV04 – 05.2014 5-183
Examples for Models with 3-Line LCDs
Call Park/Pickup Configuration Precedence Rule
For users upgrading from Release 2.x firmware, the "softkeyN value" parameter will be used if the "sip lineN park pickup
config" parameter is not set. If the per-line park pickup config parameter is set, the following precedence rule will apply:
For example, the following has been configured on the phone:
softkey1 type: park
softkey1 label: parkCall
softkey1 states: connected
softkey1 value: broadworks;*68
softkey2 type: pickup
softkey2 label: pickupCall
softkey2 states: idle, outgoing
softkey2 value: broadworks;*88
sip park pickup config: 70;70;asterisk
sip line1 park pickup config: *78;*98;broadworks
If the active call is using Line1, the phone will use the BroadWorks method for park (*78) and pickup (*98) since per-line
has the highest precedence.
If the active call is using any other line except Line1, the phone will use the Asterisk method for park (70) and pickup (70)
since it has precedence over the softkey value.
Server Park Configuration Pickup Configuration
Asterisk prgkeyN type: park
sip lineN park pickup config: 70;70;asterisk
prgkeyN type: pickup
sip lineN park pickup config: 70;70;asterisk
Sylantro prgkeyN type: park
sip lineN park pickup config: *98;*99;sylantro
prgkeyN type: pickup
sip lineN park pickup config: *98;*99;sylantro
BroadWorks prgkeyN type: park
sip lineN park pickup config: *68;*88;broadworks
prgkeyN type: pickup
sip lineN park pickup config: *68;*88;broadworks
ININ PBX prgkeyN type: park
sip lineN park pickup config: callpark;pickup;inin
prgkeyN type: pickup
sip lineN park pickup config: callpark;pickup;inin
Note:
The 6730i, 6731i, 6735i, 6737i, 6753i, 6755i, 6863i, 6865i and 9143i do not allow for the configuration of labels and
states for programmable keys.
1. "sip lineN park pickup config: <park_value>;<pickup_value>;<asterisk | sylantro | broadworks>" will override
"sip park pickup config: <park_value>; <pickup_value>; <asterisk | sylantro | broadworks | inin>"
2. "sip park pickup config: <park_value>;<pickup_value>;<asterisk | sylantro | broadworks | inin>"
will override
"softkeyN value: <park_or_pickup_value>" (or topsoftkeyN, prgkeyN, or expmod1 keyN).
3. "softkeyN value: <asterisk|sylantro|broadworks|inin>;<park_or_pickup_value>"
will have lowest priority.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section,
“” on pageA-184, “Softkey Settings” on pageA-158 and “Programmable Key Settings” on pageA-166.