Filter
Top Products
Network Settings
4-22 41-001343-02 REV04 – 05.2014
9. Select a negotiation method to use on port 1and press Done. Valid values are:
• AutoNegotiation
• Full 10Mbps
• Full 100Mbps
• Full 1000Mbps (applicable for the 6739i, 6735i, 6737, 6865i, and 6867i IP phones only)
• Half 10Mbps
• Half 100Mbps
• Half 1000Mbps (applicable for the 6739i, 6735i, 6737, 6865i, and 6867i IP phones only)
Default is AutoNegotiation.
10. Press Done (3 times) to finish configuring the configuration server protocol for the IP phone.
Note:
The session prompts you to restart the IP phone to apply the configuration settings.
11. Select Restart.
For the 6739i:
1. Press the Options key on the phone to enter the Options List.
2. Press Advanced. A keyboard displays.
3. Enter the Administrator password using the keyboard. Default is “22222”.
4. Press Network.
5.
Press to scroll to the next screen.
6. Press Ethernet & VLAN.
7. Press LAN Port.
8. Select a negotiation method to use on port 0. Valid values are:
• Auto
• Full 10Mbps
• Full 100Mbps
• Full 1000Mbps
• Half 10Mbps
• Half 100Mbps
• Half 1000Mbps
Default is Auto.
9.
Press
10. Press PC Port.
11. Select a negotiation method to use on port 1. Valid values are:
• Auto
• Full 10Mbps
• Full 100Mbps
• Full 1000Mbps
• Half 10Mbps
• Half 100Mbps
• Half 1000Mbps
Default is Auto.
12.
Press until the Options List screen displays.
13. Press Restart to restart the phone for the change to take affect.
IP Phone UI