Filter
Top Products
Operational Features
41-001343-02 REV04 – 05.2014 5-109
Directed Call Pickup
(DCP)/Group Call Pickup
(GCP)
dcp Directed Call Pickup (This feature is not supported for the 6735i, 6737i, 6863i, 6865i, and 6867i
in Release 3.3.1 SP3).
(For Sylantro Servers) Indicates the key is configured for either Directed
Call Pickup or Group Call Pickup. The DCP/GCP feature allows you to inter-
cept - or pickup - a call on a monitored extension(s).
For more information about DCP/GCP, see the section “Directed Call
Pickup/Group Call Pickup” on page5-151.
Do Not Disturb (DND) dnd Do Not Disturb Indicates key is configured for "do not disturb" use.
For more information on DND, see the section “Do Not Disturb (DND)” on
page5-154.
Extensible Markup Lan-
guage) (XML)
xml XML Indicates the key is configured to accept an XML application for accessing
customized XML services. You can also specify a URL for an XML key.
For more information on XML, see the section “XML Customized Services”
on page5-239.
Flash flash Flash Indicates the key is set to generate a flash event when it is pressed, or
when a feature key is pressed on the 6757i CT handset. The IP phone gen-
erates flash events only when a call is connected and there is an active RTP
stream (for example, when the call is not on hold).
For more information about the Flash key, see your <Model-Specific> IP
Phone User Guide.
Sprecode sprecode Sprecode Indicates the key is set to automatically activate specific services offered
by the server. For example, if the sprecode value of *82 is configured, then
by pressing the key, *82 automatically activates a service provided by the
server. The value you enter for this field is dependent on the services pro-
vided by the server.
For more information about the Sprecode key, see your <Model-Specific>
IP Phone User Guide.
Park park Park Indicates the key is set to be used as a park key to park an incoming call.
For more information on park, see the section “Park/Pick Up Static and
Programmable Configuration” on page5-177.
Pickup pickup Pickup Indicates the key is set to be used as a pickup key to pick up a parked call.
For more information on pickup, see the section “Park/Pick Up Static and
Programmable Configuration” on page5-177.
Last Call Return (LCR) lcr Last Call Return (For Sylantro Servers) Indicates the key is set to be used to dial the last call
that came in on that line.
For more information on lcr, see the section “When the user presses the
Pickup softkey, the phone will dial out *88 to connect to the pickup orbit,
wait four seconds, automatically send the pickup dial code of 42, and then
at this time the user can enter the last two digits of the pickup extension to
complete the call pickup.” on page5-186.
Call Forward callforward Call Forward Indicates the key is set to be used to access the Call Forward menus on the
phone.
For more information about call forwarding, see the section “Call Forward-
ing” on page5-190.
BLF/Xfer blfxfer Call Forward Indicates the key is set to be used as a BLF key AND as a Transfer key.
For more information about the BLF/Xfer feature, see the section “Use the
following parameters to configure the ring splashsettings:” on page5-
137.
Softkey/Programma-
ble Key Function
Configuration File
Parameter
Aastra Web UI
Parameter
Description