Aastra Telecom 41-001343-02 IP Phone User Manual


  Open as PDF
of 876
 
Operational Features
5-40 41-001343-02 REV04 – 05.2014
Specifying the Screen Language to Use
Once the language pack(s) have loaded, you must then specify which language to use on the phone. After the phone has
booted up, you can specify which language(s) to use. You can use the configuration files (via the “language” parameter)
and the IP Phone UI to specify the language for the IP Phone UI. You can use the configuration files (via the “web lan-
guage” parameter) and Aastra Web UI to specify the files for the Aastra Web UI.
Use the following procedures to specify the language to use on the IP phone.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section, “Language Settings” on pageA-134 and “Language Pack Set-
tings” on pageA-136.
Notes:
• If you specify the language to use on the phone via the configuration files, you must reboot the phone for the
changes to take affect.
• All languages may not be available for selection. The available languages are dependant on the language packs cur-
rently loaded to the IP phone.
IP Phone UI
1.
Press on the phone to enter the Options List.
2. Select Language.
3. Select Screen Language.
4. Select the applicable language.
Notes:
• Valid values for the 6757i CT cordless handset are English, French, and Spanish only.
• All languages may not be available for selection. The available languages are dependant on the language packs currently loaded to the IP
phone. English is the default language and cannot be changed or removed. For more information about loading language packs, see
“Loading Language Packs” on page5-38.
5. Press Done to save the changes.
The change is dynamic. The IP phone UI displays all menu items in the language you chose.
For the 6739i:
1.
Press on the phone to enter the Options List.
2. Press the <Language> button.
3. Press the <Screen Language> button. The screen displays a list of available languages.
Note:
All languages may not be available for selection. The available languages are dependant on the language packs currently loaded to the IP
phone. English is the default language and cannot be changed or removed. For more information about loading language packs, see “Load-
ing Language Packs” on page5-38.
4. Press the screen language you want to set on the phone. The change takes place immediately.
5.
Press the to return to the previous menu or press the to return to the idle screen.
For the 6867i:
1.
Press to enter the Options List.
 previous next