Filter
Top Products
Operational, Basic, and Advanced Parameters
A-145 41-001343-02 REV04 – 05.2014
Incoming Intercom Settings
Parameter –
sip intercom prefix code
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description The prefix to add to the phone number for server-side outgoing Intercom calls. This
parameter is required for all server-side Intercom calls.
Note:
The example below shows *96 for the prefix code which is used for Sylantro servers.
Format String
Default Value Not Applicable
Range Not Applicable
Example sip intercom prefix code: *96
Parameter –
sip intercom line
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Specifies the line for which the IP phone uses the configuration from, when making the
Intercom call. The IP phone uses the first available line for physically making the call but
uses the configuration from the line you set for this parameter.
Note:
The "sip intercom type" parameter must be set with the Server-Side option to enable the
"sip intercom line" parameter.
Format Integer
Default Value 1
Range Line 1 through 9
Example sip intercom line: 1
Parameter –
sip allow auto answer
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Enables or disables the IP phone to allow automatic answering for an Intercom call. If
auto-answer is enabled on the IP phone, the phone plays a tone to alert the user before
answering the intercom call. If auto-answer is disabled, the phone treats the incoming
intercom call as a normal call.
Format Boolean
Default Value 1 (true)
Range 0 (false - do not allow auto-answer)
1 (true - allow auto-answer)
Example sip allow auto answer: 0