Filter
Top Products
Operational, Basic, and Advanced Parameters
A-35 41-001343-02 REV04 – 05.2014
LAN Port (Ethernet Port 0) Parameters
Parameter –
vlan id
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Allows you to configure a VLAN ID that associates with the physical Ethernet Port 0 (LAN
port).
Notes:
• Setting the “vlan id” to 4095 and “vlan id port 1” to any ID from 1 to 4094 will allow
frames from the PC port (containing a VLAN ID) to be untagged before being forwarded
to the LAN port and frames from the LAN port (without a VLAN ID) to be tagged with the
configured VLAN ID before being forwarded to the PC port.
Example:
You enable tagging on the phone port as normal but set the “vlan id” to 4095 and the
“vlan id port 1” to any ID from 1 to 4094. The following example sets the PC port to be on
VLAN 3 but the LAN port is configured as untagged:
tagging enabled: 1
vlan id: 4095
vlan id port 1: 3
• Alternatively setting the “vlan id” to any ID from 1 to 4094 and “vlan id port 1” to 4095
will allow frames from the LAN port (containing a VLAN ID) to be untagged before being
forwarded to the PC port and frames from the PC port (without a VLAN ID) to be tagged
with the configured VLAN ID before being forwarded to the LAN port.
Format Integer
Default Value 1
Range 1 to 4095
Example vlan id: 300
Parameter –
tos priority map
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description This parameter is based on the Type of Service (ToS), Differentiated Services Code Point
(DSCP) setting for SIP (tos sip parameter), RTP (tos rtp parameter) and RTCP (tos rtcp
parameter). It is the mapping between the DSCP value and the VLAN priority value for SIP,
RTP, and RTCP packets.
You enter the tos priority map value as follows:
(DSCP_1,Priority_1)(DSCP_2,Priority_2).....(DSCP_64,Priority_64)
where the DSCP value range is 0-63 and the priority range is 0-7. Mappings not enclosed in
parentheses and separated with a comma, or with values outside the ranges, are ignored.
Format Integer
Default Value 3 (based on the default ToS DSCP SIP setting of 26)
5 (based on the default ToS DSCP RTP setting of 46)
5 (based on the default ToS DSCP RTCP setting of 46)
Range 0 to 63 (for DSCP)
0 to 7 (for SIP, RTP, and RTCP pr iorities)
Example tos priority map: (26,7)