Filter
Top Products
Operational Features
41-001343-02 REV04 – 05.2014 5-121
Reference
For more information about features key functions for your 6757i CT, see your Aastra IP Phone 6757i CT User’s Guide.
Configuring Handset Feature Keys
You can program up to 15 feature keys on the 6757i CT IP phone using the configuration files or the Aastra Web UI. Use the
following procedure to program the feature keys on your 6757i CT Base Station and all paired handsets.
Use the following procedures to configure the IP phone handset feature keys.
Public public Public Indicates the key is configured to toggle from public to private mode. A
public and private key can be used when at a line item in the Directory List.
The Private key toggles a number in the Directory List to private. The Pub-
lic key allows a number in the Directory List to be sent to the handsets. A
6757i CT accepts a maximum of 50 entries with the public attribute.
For more information about the public/private keys, see your Aastra IP
Phone 6757i CT User’s Guide.
Flash flash Flash Indicates the key is set to generate a flash event when it is pressed, or when
a feature key is pressed on the 6757i CT cordless handset. The IP phone
generates flash events only when a call is connected and there is an active
RTP stream (for example, when the call is not on hold).
For more information about the Flash key, see your Aastra IP Phone 6757i
CT User’s Guide.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section,“Handset Feature Key Settings” on pageA-175.
Feature Key Function
Configuration File
Parameter
Aastra Web UI
Parameter
Description